Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 21 kılavuzları etkileyecektir.

İngilizce
Fransızca

Adım 14 çevriliyor

Adım 14
Use a spudger to disconnect the two visible display flex connectors by gently prying them straight up from their sockets. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
  • Use a spudger to disconnect the two visible display flex connectors by gently prying them straight up from their sockets.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

À l'aide d'une spatule (spudger), déconnectez les connecteurs des deux nappes de l'écran en les soulevant délicatement hors de leur prise.

Pour rattacher des connecteurs à pression comme ceux-ci, alignez soigneusement un côté et appuyez dessus jusqu'à ce qu'il s'enclenche, puis répétez l'opération de l'autre côté. N'appuyez pas au milieu. Si le connecteur est mal aligné, les broches peuvent se plier et causer des dommages irréversibles.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.