Eşyalarını Tamir Et Topluluk Mağaza

Reloop RP-4000 M3D Demontage / Reparatie

Kılavuza Dön
İngilizce
Flemenkçe
Adım 4
Reloop RP-4000 M3D Disassembly / Repair, Direct-Drive disassembly: adım 0, 3 resimden 1. Reloop RP-4000 M3D Disassembly / Repair, Direct-Drive disassembly: adım 0, 3 resimden 2. Reloop RP-4000 M3D Disassembly / Repair, Direct-Drive disassembly: adım 0, 3 resimden 3.
Direct-Drive disassembly

  • Tilt the housing for loosen the 4 phillips screws at the top (marked yellow).

  • unplug the blue cable

  • unplug the white cable

  • unwrap the yellow cable-pack

  • loosen the last phillips screw holding the drive-pcb.

Direct-Drive demontage

Kantel de behuizing om de 4 kruiskopschroeven aan de bovenkant los te draaien (geel gemarkeerd).

Koppel de blauwe kabel los

Koppel de witte kabel los

Maak het gele kabelpakket los.

draai de laatste kruiskopschroef los waarmee de direct-drive printplaat vastzit.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.