Ana içeriğe geç
İngilizce
Fransızca
Adım 6
Now that your controller looks something like pic 1, open the midframe Partially. Again, be careful here, because the vibration motors are hard-soldered on the board. Remove the two more latches on the sides of the contact pins.
Removing the button board- part 2
  • Now that your controller looks something like pic 1, open the midframe Partially.

  • Again, be careful here, because the vibration motors are hard-soldered on the board.

  • Remove the two more latches on the sides of the contact pins.

  • Pull the board out carefully.

Maintenant que votre contrôleur ressemble à l'image 1, ouvrez partiellement le cadre intermédiaire.

Encore une fois, soyez prudent ici, car les moteurs de vibration sont soudés sur la carte.

Retirez les deux autres loquets situés sur les côtés des broches de contact.

Retirez délicatement la planche.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.