Ana içeriğe geç
İngilizce
Çince
Adım 6
Now that your controller looks something like pic 1, open the midframe Partially. Again, be careful here, because the vibration motors are hard-soldered on the board. Remove the two more latches on the sides of the contact pins.
Removing the button board- part 2
  • Now that your controller looks something like pic 1, open the midframe Partially.

  • Again, be careful here, because the vibration motors are hard-soldered on the board.

  • Remove the two more latches on the sides of the contact pins.

  • Pull the board out carefully.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.