Eşyalarını Tamir Et Topluluk Mağaza

Equestic SaddleClip USB Micro-B Connecteur et remplacement de la batterie

Kılavuza Dön
İngilizce
Fransızca
Adım 5
Equestic SaddleClip USB Micro-B Connector and Battery Replacement, Removing back panel: adım 0, 3 resimden 1. Equestic SaddleClip USB Micro-B Connector and Battery Replacement, Removing back panel: adım 0, 3 resimden 2. Equestic SaddleClip USB Micro-B Connector and Battery Replacement, Removing back panel: adım 0, 3 resimden 3.
Removing back panel

  • The hinge block highlighted in green (with the screws removed in step 3) feels loose, but is still retained with 2 clips

  • If you look down inside the open front, you can just make out two triangular clips located in the yellow circles. These clips hold the hinge block to the PCB.

  • Using some sharp tweezers gently release the pcb clips and the hinge block will release.

Retrait du panneau arrière

Le bloc de charnière surligné en vert (avec les vis retirées à l'étape 3) semble lâche, mais est toujours retenu avec 2 clips

Si vous regardez à l'intérieur du devant ouvert, vous pouvez simplement distinguer deux clips triangulaires situés dans les cercles jaunes. Ces clips maintiennent le bloc charnière au PCB.

À l'aide d'une pince à épiler pointue, relâchez doucement les clips du circuit imprimé et le bloc de charnière se détachera.

[title] Removing back panel
[* black] The hinge block highlighted in green (with the screws removed in step 3) feels loose, but is still retained with 2 clips
[* black] If you look down inside the open front, you can just make out two triangular clips located in the yellow circles. These clips hold the hinge block to the PCB.
-[* black] Using some sharp tweezers gently release the pcb clips and the hinge block will release.
+[* black] Using some [product|IF145-020-2|sharp tweezers] gently release the pcb clips and the hinge block will release.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.