Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 27 çevriliyor
Adım 27
Adding Reinforcement Rails
-
Attach the reinforcement rails to the back of the node using two 5/16" hex bolts, two 5/16" hex bolts, and two 5/16" 1.25" OD washers. Insert the bolts the bottom two holes of the node enclosure, using the bottom holes of the rails as shown in the image.
-
Line up the top holes of the rails with the top node enclosure holes and then tighten the bottom bolts.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.