Eşyalarını Tamir Et Topluluk Mağaza

Google Pixel 3a屏幕更换指南

Kılavuz Bilgisi

= Bitti = Eksik
İngilizce
Çince
    ***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides [[Info:content-quality|here|new_window=true]].***
    Does your Pixel have a broken or cracked screen? Follow this guide to replace it!
    '''***The Pixel 3a’s unreinforced display panel is fragile'''***. If you are reusing the screen, be sure to pay special attention to the warnings in the opening procedure.
      '''***If your Pixel won't turn on after replacing the screen, there is a chance that the phone has silently turned on when the battery is re-connected. Hold the power button for a few seconds until the phone vibrates off. Afterwards, re-connect the screen, and try again.'''***
      To reassemble your device, follow these instructions in reverse order.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Google%20Pixel%203a|Google Pixel 3a Answers community] for troubleshooting help.[br]

      Kılavuz Adımları

      Adım 1

      请务必注意手机屏幕区域的两个缝隙：

      Adım 2

      加热你的iOpener，并将其放在屏幕右边缘一分钟。

      Adım 3

      将吸盘放在屏幕的右边缘。

      Adım 4

      这一步会告诉你如何在不伤害手机OLED显示面板的前提下插入撬片。请在分开手机屏幕长的一边之前完成本操作。

      Adım 5

      沿右边缘划动撬片，使其穿过并划开粘胶。

      Adım 6

      当你的撬片移动到手机底部时，请保证插入的距离不要超过1/4英寸（6毫米）。

      Adım 7

      使用撬片，沿着左边缘继续划动。确保将撬片正确地对准屏幕显示面板下方，并将其插入不超过1/4英寸（6毫米）的地方。

      Adım 8

      沿着手机顶部继续划动撬片，保证插入的长度不超过5/16英寸（8毫米）。

      Adım 9

      在撬片划过手机的四边后，小心的从右侧抬起屏幕。

      Adım 10

      所有的粘胶被全部切开后，从手机上部抬起屏幕并向上翻转，此时屏幕排线应该是拱形的。

      Adım 11

      小心剥离位于屏幕排线固定板上方的黑色胶带。

      Adım 12

      使用撬棒的尖端撬起并断开屏幕排线。

      Adım 13

      移除屏幕。

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.