Ana içeriğe geç
İngilizce
İspanyolca

Adım 19 çevriliyor

Adım 19
Now we remove the expansion bay grid. And now is the time to remove the fan wire from the main board, using a precision tweezer. But..  I can't, it is simply stuck. I already removed this ealier, but now is harder, so I will try later, in the end of the teardown. And now is the time to remove the fan wire from the main board, using a precision tweezer. But..  I can't, it is simply stuck. I already removed this ealier, but now is harder, so I will try later, in the end of the teardown.
  • Now we remove the expansion bay grid.

  • And now is the time to remove the fan wire from the main board, using a precision tweezer. But.. I can't, it is simply stuck. I already removed this ealier, but now is harder, so I will try later, in the end of the teardown.

Ahora quitaremos la rejilla de la bahía de expansión.

Y ahora es el momento de quitar el cable del ventilador de la placa base, utilizando unas pinzas de precisión. (Yo ahora no he podido, simplemente se ha quedado atascado, ya lo he quitado antes, pero ahora simplemente está más duro, así que intentaré quitarlo más tarde en el desmontaje).

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.