Ana içeriğe geç
İngilizce
Çince

Adım 20 çevriliyor

Adım 20
There is a cover on the right side of the chassis. Behind it, the SCSI backplane, auxillary fan, and line supply connections can be accessed. 4 screws secure the cover
  • There is a cover on the right side of the chassis. Behind it, the SCSI backplane, auxillary fan, and line supply connections can be accessed.

  • 4 screws secure the cover

  • This guide post holds the cover in place when the screws have been removed

  • The cover has a tab at the top. Slide it out and down to remove it.

  • With the cover removed

  • This screw holds the auxillary fan in place. The fan power connector plugs into the SCSI backplane.

  • These screws hold the line supply connections in place. These connect to the system backplane and mains circuit breaker

  • These screws hold in the SCSI backplane. Remove the SCSI bus connections and power connector and hold them out of the way when removing the SCSI backplane. Remove SCSI devices before removing the backplane.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.