Ana içeriğe geç

iPhone XRLCD 및 디지타이저 교체

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

İngilizce
Korece

Adım 12 çevriliyor

Adım 12
iPhone XR LCD and Digitizer Replacement, Check the EMI fingers: adım 0, 3 resimden 1. iPhone XR LCD and Digitizer Replacement, Check the EMI fingers: adım 0, 3 resimden 2. iPhone XR LCD and Digitizer Replacement, Check the EMI fingers: adım 0, 3 resimden 3.
Check the EMI fingers
  • As you lift the LCD shield, note the metal prongs on the bottom edge.

  • During reassembly, make sure these prongs (a.k.a. EMI fingers) are correctly inserted into the LCD frame as shown.

LCD 실드를 들어 올릴 때 하단 가장자리에 있는 금속 프롱을 주목하세요.

재 조립할 때 그림과 같이 이 프롱(EMI 핑거라고도 함)이 LCD 프레임에 올바르게 끼워졌는지 확인하세요.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.