Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
İspanyolca

Adım 10 çevriliyor

Adım 10
Remove the RAM. Remove the hard drive metal bracket. Mine had 2 screws but I believe there are supposed to be 4 (lost them when I replaced the hard rive last time). Disconnect ribbon from motherboard. Remove the wireless card. There are 2 antennas connected to it, the back wire goes on the main, gray on aux.
  • Remove the RAM.

  • Remove the hard drive metal bracket. Mine had 2 screws but I believe there are supposed to be 4 (lost them when I replaced the hard rive last time). Disconnect ribbon from motherboard.

  • Remove the wireless card. There are 2 antennas connected to it, the back wire goes on the main, gray on aux.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.