Eşyalarını Tamir Et Topluluk Mağaza

Reemplazo de LEDs en luces navideñas

Kılavuza Dön
İngilizce
İspanyolca
Önceki adım

Adım 3 çevriliyor

Adım 3
LED Christmas Lights LED Replacement: adım 0, 3 resimden 1. LED Christmas Lights LED Replacement: adım 0, 3 resimden 2. LED Christmas Lights LED Replacement: adım 0, 3 resimden 3.

  • Remove the bad LED from the plug so you can re-use the plug. Notice the new LED has one leg longer than the other.

  • The long lead goes into the side of the plug with the key as shown in the picture.

  • The bulb of the LED may not seat perfectly but who cares, it will be under the plastic faceted bulb cover.

  • Bend the leads up and cut.

  • Try bulb in your "good" strand if you have one. If it works, put it into your bad strand and see if that has fixed the problem. If not, you know the LED is good now, so go on to the next one.

Retira el LED defectuoso del enchufe para que puedas volver a utilizarlo. Observa que el nuevo LED tiene una pata más larga que la otra.

El cable largo va en el lado del enchufe con la llave como se muestra en la imagen.

La bombilla del LED puede no asentarse perfectamente pero a quién le importa, estará debajo de la tapa de plástico de la bombilla facetada.

Dobla los cables y corta.

Prueba la bombilla en tu "buen" filamento si tienes uno. Si funciona, ponla en la rama mala y mira si eso ha solucionado el problema. Si no, sabes que el LED está bien ahora, así que pasa al siguiente.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.