Ana içeriğe geç

Remplacement du boitier avant du Sony Alpha A350

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

İngilizce
Fransızca

Adım 1 çevriliyor

Adım 1
Sony Alpha A350 Front Case Replacement: adım 0, 2 resimden 1. Sony Alpha A350 Front Case Replacement: adım 0, 2 resimden 2.
  • Using a Phillips #00 Screwdriver, remove the four 5.5mm screws from the bottom of the camera.

  • Using a Phillips #00 Screwdriver, remove the one 4.3mm screw.

Utilisation d'un Phillips # 00 Retirez cinq vis du bas de la caméra.

Quatre vis de 4,3 mm.

Une vis de 5,5 mm.

-[* black] Using a Phillips #00 Remove five screws from the bottom of the camera.
-[* red] Four 4.3mm screw.
-[* orange] One 5.5mm screw.
+[* red] Using a Phillips #00 Screwdriver, remove the four 5.5mm screws from the bottom of the camera.
+[* orange] Using a Phillips #00 Screwdriver, remove the one 4.3mm screw.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.