Ana içeriğe geç

Remplacement de l'assemblage supérieur du Sony α6500

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
Fransızca
Adım 4
Sony α6500 Top Assembly Replacement: adım 0, 3 resimden 1. Sony α6500 Top Assembly Replacement: adım 0, 3 resimden 2. Sony α6500 Top Assembly Replacement: adım 0, 3 resimden 3.
  • To remove the top of the camera you must remove the back first.

  • Remove the 2.5 mm JIS 00 screw from the side of the camera near the viewfinder.

  • Use the opening tool to pry off the small cover.

  • Remove two 2.5 mm JIS 00 screws from underneath the cover.

  • Remove a 5 mm JIS 00 screw from underneath the cover.

Pour retirer le haut de la caméra, vous devez d'abord retirer le dos.

Retirez la vis JIS 00 de 2,5 mm sur le côté de l'appareil photo près du viseur.

Utilisez l'outil d'ouverture pour soulever le petit couvercle.

Retirez deux vis JIS 00 de 2,5 mm sous le couvercle.

Retirez une vis JIS 00 de 5 mm sous le couvercle.

[* icon_note] To remove the top of the camera you must remove the back first.
-[* red] Remove the 2.5mm JIS 00 screw from the side of the camera near the viewfinder.
+[* red] Remove the 2.5 mm JIS 00 screw from the side of the camera near the viewfinder.
[* black] Use the opening tool to pry off the small cover.
- [* orange] Remove two 2.5mm JIS 00 screws from underneath the cover.
- [* yellow] Remove a 5mm JIS 00 screw from underneath the cover.
+ [* orange] Remove two 2.5 mm JIS 00 screws from underneath the cover.
+ [* yellow] Remove a 5 mm JIS 00 screw from underneath the cover.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.