Ana içeriğe geç
İngilizce
Almanca
Adım 2
Remove the Face ID flex cable bracket. During re-assembly, reinstall the bracket so that it keeps the flex cables separate from the battery. Don't try to slide it between the flex cables and the logic board/camera area.
Remove the bracket
  • Remove the Face ID flex cable bracket.

  • During re-assembly, reinstall the bracket so that it keeps the flex cables separate from the battery. Don't try to slide it between the flex cables and the logic board/camera area.

Entferne die Halterung des Face ID-Flachbandkabels.

Setze beim Zusammenbau die Halterung so ein, dass sie die Flachbandkabel vom Akku getrennt hält. Versuche nicht, sie zwischen die Flachbandkabel und den Logic Board/Kamerabereich zu schieben.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.