Ana içeriğe geç

Schermmodule

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Flemenkçe
Adım 7
Display Assembly, Disconnect the front sensors + digitizer: adım 0, 3 resimden 1. Display Assembly, Disconnect the front sensors + digitizer: adım 0, 3 resimden 2. Display Assembly, Disconnect the front sensors + digitizer: adım 0, 3 resimden 3.
Disconnect the front sensors + digitizer
  • Use a spudger or a fingernail to disconnect the front sensor assembly cable connector.

  • Use a spudger or a fingernail to disconnect the digitizer cable connector.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

Gebruik een spudger of een nagel om de kabelaansluiting van de voorste sensormodule los te koppelen.

Gebruik een spudger of een nagel om de kabelaansluiting van de digitizer los te koppelen.

Als er een deel van je scherm niet op aanraking reageert na de reparatie, ontkoppel je de batterij en sluit je deze aansluiting opnieuw aan. Zorg hierbij dat deze volledig op z'n plaats klikt en dat er geen stof of andere dingen in het contact zitten.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.