Ana içeriğe geç
İngilizce
Çince

Adım 1 çevriliyor

Adım 1
Use the pointed end of a spudger to disconnect the display cable from the motherboard. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
Disconnect the display cable
  • Use the pointed end of a spudger to disconnect the display cable from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

使用撬棒的尖端从主板上断开显示电缆的接口。

要重新连接这样的压接接口,请仔细对齐并向下按压一侧,直到其卡入到位,然后在另一侧重复。不要向下压中间。如果连接器未对准,则插针会弯曲,从而造成永久性损坏。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.