Remplacement de l'ensemble objectif du Sony a7

İngilizce

Fransızca

Kılavuz Bilgisi

= Bitti = Eksik

Hangi parçayı değiştiriyorsunuz?

Başlık

Giriş

This replacement guide will address how to remove the lens assembly from a Sony a7 model number ILCE-7 camera. The lens assembly is a frame that allows the lens to attach to the camera and take photos. The lens unit itself is an interchangeable, separate piece of hardware from the actual camera. This three-step guide will outline what actions to take when the lens assembly fails.

If the lens attachment is unable to affix to the camera or take photos, or the camera’s shutter door fails to operate consistently, there is a chance that the lens assembly needs to be repaired. Before beginning this process, it may be helpful to reference this [[Sony a7 Troubleshooting#Section_Damaged_Lens_Assembly|troubleshooting page]], which could help with addressing issues before having to go through the process of removing the lens assembly. The tool necessary to complete this replacement guide is a PH00 Phillips screwdriver. No special skills or technical degrees are required to understand this replacement guide.

[br]

Sonuç

Hangi parçayı değiştiriyorsunuz?

Başlık

Giriş

Sonuç

Kılavuz Adımları

Adım 1

Positionnez la caméra de façon à ce que l'objectif et le logo «SONY» avant soient tournés vers l'avant et à la verticale.

Adım 2

Retirez chacune des quatre vis M1,5x4 mm à l'aide d'un tournevis Phillips PH00.

Adım 3

Soulevez la plaque métallique circulaire hors de la base de la lentille et mettez-la de côté.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.