Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Almanca

Nintendo DS oberes LCD Austausch

Kılavuz Ön Koşulları

Bu çevirinin tamamlanmış sayılması için önce, tüm ön koşul kılavuzlarının çevrilmesi gerekir.

Nintendo DS Akku Austausch

Nintendo DS Rückabdeckung Austausch

Nintendo DS Platine Austausch

Kılavuz Bilgisi

= Bitti = Eksik
[ ]Use this guide to replace the upper LCD Screen of your Nintendo DS.
    The top LCD purpose of this guide is easy to remove once explain how to replace the rest of upper LCD screen in a Nintendo DS. All tools needed to fix the screen can be referenced or bought in the cover tool section below. Care should be taken when removing and circuit board have been moving the ribbon cables to make sure not to tear, break, or damage them. Care should also be taken out. when the screen is removed from the case to make sure not to tear, break, or damage the black and red wires connecting the two circuit boards. Damage to either of these components might not be able to be fixed and will not be covered in this guide. To prevent damage to these components, the proper tool must be used.
    The top LCD purpose of this guide is easy to remove once explain how to replace the rest of upper LCD screen in a Nintendo DS. All tools needed to fix the screen can be referenced or bought in the cover tool section below. Care should be taken when removing and circuit board have been moving the ribbon cables to make sure not to tear, break, or damage them. Care should also be taken out. when the screen is removed from the case to make sure not to tear, break, or damage the black and red wires connecting the two circuit boards. Damage to either of these components might not be able to be fixed and will not be covered in this guide. To prevent damage to these components, the proper tool must be used.

      Üzerinde çalıştığınız device'ın spesifik parçasını veya bileşenini tarif edin. EÖrneğin: Pil

      Bir başlık oluştur.

      Bu kısa özet yalnızca arama sonuçlarında görünecektir.

      Okuyucuya, onlar daha kılavuza dalmadan önce gerekli olan arka plan bilgilerini aktarın.

      Kılavuz Adımları

      Adım 1

      Zihe die Gummiabdeckungen über den Schrauben mit einem kleinen Schraubendreher oder einer geeigneten Nadel heraus.

      Adım 2

      Heble dann die Kanten des Kunstoffgehäuses mit einem Plastiköffnungswerkzeug an der Naht auseinander.

      Adım 3

      Löse die obere Abdeckung.

      Adım 4

      Fädle die Flachbandkabel und das WiFi Kabel durch die Öffnung in der Abdeckung des Scharniers.

      Adım 5

      Die beiden Platinen an den Lautsprechern sind mit zwei PH00 Schrauben befestigt, drehe sie heraus.

      Adım 6

      Kippe die Sicherungsbügel an den Verbindern der beiden großen Flachbandkabeln hoch und löse vorsichtig die beiden Flachbandkabel.

      Adım 7

      Hebele das LCD mit einem geeigneten Werkzeug aus seinem Sitz.

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.