Ana içeriğe geç

Lenovo ThinkPad X1 Carbon 4e generatie Vervanging van het onderste paneel

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 9 kılavuzları etkileyecektir.

Adım 1 çevriliyor

İngilizce
Flemenkçe
Adım 1
Lenovo Thinkpad X1 Carbon 4th Gen Bottom Panel Replacement: adım 0, 2 resimden 1. Lenovo Thinkpad X1 Carbon 4th Gen Bottom Panel Replacement: adım 0, 2 resimden 2.
  • Unscrew the nine captive screws on the bottom cover of the laptop using a Phillips #1 screwdriver.

  • The screws do not fully come out of the back cover, so there is no need for screw management.

  • There are a few small clips around the edge that you may need to pry at to free them. An opening pick may be helpful for this process.

Schroef de negen schroeven aan de onderkant van de laptop los met behulp van een Phillips #1 schroevendraaier.

De schroeven zullen niet volledig uit de onderste behuizing komen, dus er is geen noodzaak om de schroeven te organiseren om ze niet kwijt te raken.

[* red] Unscrew the nine captive screws on the bottom cover of the laptop using a Phillips #1 screwdriver.
[* icon_note] The screws do not fully come out of the back cover, so there is no need for screw management.
+[* black] There are a few small clips around the edge that you may need to pry at to free them. An opening pick may be helpful for this process.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.