Drawer Roller Bracket Replacement

Adım 4 çevriliyor

İngilizce

Fransızca

Adım 4

Remove the excess bracket. Make sure to remove parts of the bracket that do not contain holes. These holes are used for fasteners.
To cut a section, make sure you make perfectly vertical cuts for the remaining pieces to line up. To assure a straight line to cut, use a sharpie marker to mark a straight line.
Use a reciprocating power saw or a grinder with cutting wheel. I used a grinder because I found it to be easier.
Maintain eye protection, and gloves if necessary.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.