Drawer Roller Bracket Replacement

Adım 5 çevriliyor

İngilizce

İtalyanca

Adım 5

Apply JB Kwikweld to the remaining pieces of bracket. Mix equal parts of the mixture.
Discard the removed piece from last step.
When applying JB weld, use a small amount, I used a toothpick as an applicator.
Set time was roughly 6 minutes for the weld mixture to set.
Before adding weight to the drawer, allow the weld to fully cure. This will take 4-6 hours.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.