Eşyalarını Tamir Et Topluluk Mağaza

移除电池

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Çince
Adım 2
Battery Removal: adım 0, 3 resimden 1. Battery Removal: adım 0, 3 resimden 2. Battery Removal: adım 0, 3 resimden 3.

  • Slide the opening pick along the edge of the battery to loosen the adhesive.

  • The adhesive which holds the battery in place is soft. However, if you're struggling to pry out the battery you can place a heated iOpener on the rear side of the watch to loosen the adhesive. Apply the iOpener for at least two minutes.

  • Use constant, steady pressure to slowly pry the battery up, separating it from the adhesive securing it to the system board.

  • Mind the display cables and especially the Force Touch cable which covers the battery in one corner so you don't damage them when levering the battery out.

  • Make sure you don't puncture or deform the battery, as it can catch fire and/or explode if damaged.

  • Don't try to remove the battery all the way yet. It is still connected to the watch assembly.

沿电池边缘滑动三角撬片以软化粘合剂。

将电池固定到位的粘合剂很软。 但是，如果您难以撬出电池，可以在手表背面放置一个加热的 iOpener以软化粘合剂。 请使用 iOpener 至少两分钟。

使用恒定的稳定压力缓慢撬起电池，将其与将其固定到主板的粘合剂分开。

注意屏幕排线的位置，尤其是覆盖着电池的Force Touch 排线。取出电池时请勿损伤任何排线。

确保不要刺破电池或使电池变形，否则电池可能着火和/或在损坏时爆炸。

请勿尝试完全取出电池。它仍然连接到手表组件。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.