AORUS 590X M.2 SSD Replacement

Adım 10 çevriliyor

İngilizce

Japonca

Adım 10

Peel off the plastic film on the underside of the M.2 dust cover to reveal the adhesive.
Place the dust cover end edges first into the area label M.2. Then slowly press down throughout the cover ensuring adhesive contact.
Do not place the adhesive in the center or on the SSD first. This can cause complication aligning it correctly.
The plastic film may get stuck in chucks. Do not use finger nails or sharp objects to pick at the film. The adhesive cover is soft and spongy. Use a blow dryer to soften the adhesive then grab it gently pulling towards yourself.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.