Ana içeriğe geç

MacBook Pro (13 Zoll, Mitte 2009, Unibody) Austausch der Festplatte

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

Adım 1 çevriliyor

İngilizce
Almanca
Adım 1
MacBook Pro 13" Unibody Mid 2009 Hard Drive Replacement: adım 0, 2 resimden 1. MacBook Pro 13" Unibody Mid 2009 Hard Drive Replacement: adım 0, 2 resimden 2.
  • Remove the two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

Entferne die beiden Torx T6 Schrauben auf jeder Seite der Festplatte, also vier insgesamt.

Wenn du die Festplatte austauschst, musst du diese Schrauben auf die neue übertragen.

Wenn du eine neue Festplatte einbaust, haben wir für dich eine OS X Installationsbeschreibung.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.