Ana içeriğe geç
İngilizce
Japonca
Adım 2
In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.
Adhesive tip
  • In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.

  • The adhesive surrounding the long edges of the device is thin and will only require you to insert the pick 5 mm to separate.

  • Note that along the top edge of the phone, the adhesive runs significantly farther from the device's edge. You will need to insert your pick deeper here to fully seperate the adhesive.

次の幾つかの手順では、デバイス周辺に付けられた黒い接着剤を剥がす必要があります。

デバイスの長辺側の接着剤は薄く、接着剤を切開するのに、開口ピックを5mm程度差し込んでください。

デバイスの上部端に沿って接着剤の範囲はデバイスのエッジからかなり内側まであります。開口ピックを奥深くまで差し込んで、接着剤を剥がしてください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.