Ana içeriğe geç
İngilizce
Japonca
Adım 4
Apply a suction cup to the display glass, as close to the center of the top edge as possible. If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen. Pull on the suction cup with strong, steady force to create a gap between the display glass and the frame.
  • Apply a suction cup to the display glass, as close to the center of the top edge as possible.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Pull on the suction cup with strong, steady force to create a gap between the display glass and the frame.

  • Insert the point of an opening pick into the gap in the center of the earpiece speaker notch, working it downwards underneath the display.

  • Ensure the pick slides over the front-facing camera and is not pushing against it.

  • Due to the stubborn adhesive, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right.

  • If you are having trouble creating a gap, apply more heat to the edge and try again.

  • Leave your pick in the seam to prevent the adhesive from reasealing.

吸盤カップを、ディスプレイガラスの上部端中央に近い位置に装着します。

ディスプレイの破損程度が酷い場合は、透明の梱包テープを表面に貼って、吸盤カップをしっかりと装着させます。代わりに、強力なテープで吸盤カップを作ることもできます。それでも上手くいかない場合は、強力ボンドを吸盤カップ上に付けてください。

吸盤カップをしっかりと強く一定の力で引き上げ、ディスプレイガラスとフレームの間に隙間を作ってください。

開口ピックをイヤピーススピーカーの切り欠きの真ん中の隙間に差し込みます。ディスプレイの下側に向けて差し込んでください。

フロントカメラ上にピックをスライドしてください。カメラ側に押さないでください。

強力な接着剤のため、iOpenerを複数回にわたって温めて、吸盤カップで引っ張る作業を繰り返す必要があります。

隙間が作れない場合は、デバイス端を温め直してください。

接着剤の再装着を防ぐため、ピックを継ぎ目の間に残します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.