Ana içeriğe geç
İngilizce
Japonca

Adım 12 çevriliyor

Adım 12
In this step, you will apply isopropyl alcohol behind the screen to release the clear adhesive towards the bottom center of the device. Apply high concentration (over 90%) isopropyl alcohol behind the display as close to the clear adhesive (marked red) as possible.
Separate the interior adhesive
  • In this step, you will apply isopropyl alcohol behind the screen to release the clear adhesive towards the bottom center of the device.

  • Apply high concentration (over 90%) isopropyl alcohol behind the display as close to the clear adhesive (marked red) as possible.

  • Tilt the device as you apply the alcohol to help it penetrate the adhesive underneath the lower portion of the display.

  • After you apply the alcohol, continue tilting the bottom of the phone down for two to three minutes to help the alcohol penetrate further.

この手順では、イソプロピルアルコールをスクリーンの下に注入して、デバイスの中央側に向けてアルコールを流します。

高濃度(90%以上)のイソプロピルアルコールをディスプレイの裏に注入します。赤でマークされたエリアにできるだけ近い位置に流してください。

デバイスを傾けて、ディスプレイ下側部分の下にアルコールを浸透させます。

アルコールを注入した後、2-3分間デバイス下部を傾けて、さらに接着剤に浸透させます。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.