Ana içeriğe geç
İngilizce
Çince

Adım 12 çevriliyor

Adım 12
In this step, you will apply isopropyl alcohol behind the screen to release the clear adhesive towards the bottom center of the device. Apply high concentration (over 90%) isopropyl alcohol behind the display as close to the clear adhesive (marked red) as possible.
Separate the interior adhesive
  • In this step, you will apply isopropyl alcohol behind the screen to release the clear adhesive towards the bottom center of the device.

  • Apply high concentration (over 90%) isopropyl alcohol behind the display as close to the clear adhesive (marked red) as possible.

  • Tilt the device as you apply the alcohol to help it penetrate the adhesive underneath the lower portion of the display.

  • After you apply the alcohol, continue tilting the bottom of the phone down for two to three minutes to help the alcohol penetrate further.

在此步骤中,你将在屏幕后面涂抹异丙醇,以将透明的粘合剂向设备的底部中央释放。

在显示器后面尽可能高浓度(超过90%)的异丙醇靠近透明粘合剂(标记为红色)。

涂酒精时,请倾斜设备,以帮助其渗透显示屏下部下方的粘合剂。

涂完酒精后,继续将手机底部向下倾斜两到三分钟,以帮助酒精进一步渗透。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.