Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 37 çevriliyor
Adım 37
-
Open the locking flap on the microphone array's ZIF connector by prying it straight up from the logic board.
-
Disconnect the microphone array by pulling its cable away from the logic board until it releases from its socket.
-
If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.