Ana içeriğe geç

iMac Intel 27" 2012-2019 Vervanging van de kleefstrips

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
Flemenkçe

Adım 12 çevriliyor

Adım 12
iMac Intel 27" 2012-2019 Adhesive Strips Replacement, Install the bottom adhesives: adım 0, 1 resimden 1.
Install the bottom adhesives
  • The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.

  • Read through this step and the next four steps before you attempt the procedure.

  • Grasp the red pull tab on strip 25 and pull to separate about 2 inches (5 cm) of white backing from the strip.

De volgende stappen laten je zien hoe je de strip rechtsonderin het frame (strip 25), die een inkeping voor de microfoon bevat, moet plaatsen.

Lees deze en de volgende vier stappen eerst goed door voordat je begint met de procedure.

Pak de rode treklip die op strip 25 zit vast en trek eraan tot er ongeveer 5 cm (2 inches) van de witte folie is losgekomen.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.