Ana içeriğe geç

iMac Intel 27 英寸 2012-2019 胶条替换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 12 çevriliyor

Adım 12
iMac Intel 27" 2012-2019 Adhesive Strips Replacement, Install the bottom adhesives: adım 0, 1 resimden 1.
Install the bottom adhesives
  • The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.

  • Read through this step and the next four steps before you attempt the procedure.

  • Grasp the red pull tab on strip 25 and pull to separate about 2 inches (5 cm) of white backing from the strip.

接下来的几个步骤将向您展示如何安装右下角的胶带(胶带 25),其中包括一个必须与麦克风对齐的凹口。

在尝试该过程之前,请通读此步骤和接下来的四个步骤。

抓住胶带 25 上的红色拉片,拉动以将白色背衬与条带分离约 2 英寸(5 厘米)。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.