Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.
Adım 14 çevriliyor
Adım 14
-
Align the adhesive strip to the bottom edge by positioning the microphone notch over the microphone hole.
-
If your iMac does not have a microphone hole, align the right end of the strip such that the L-bend sits next to the right vertical adhesive. The L-bend should not overlap the right vertical adhesive.
-
Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment.
| - | [* icon_note] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/NZgoACQ4lS2VM2Gi.full|the center hole|new_window=true] flanked by two larger holes. |
|---|---|
| + | [* icon_note] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/NZgoACQ4lS2VM2Gi.full|the center hole|new_window=true] flanked by two larger holes. ***In the subsequent steps, be sure to align to the microphone hole and not the larger holes. *** |
| [* red] Align the adhesive strip to the bottom edge by positioning the microphone notch over the microphone hole. | |
| [* black] If your iMac does not have a microphone hole, align the right end of the strip such that the L-bend [https://d3nevzfk7ii3be.cloudfront.net/igi/42luQihIZrU1P3AH.full|sits next to the right vertical adhesive|new_window=true].*** The L-bend should not overlap the right vertical adhesive. *** | |
| [* icon_note] The adhesive tears easily. Be careful not to pull on the strip with too much force. | |
| [* black] Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.