Ana içeriğe geç

Reemplazo de la Carcasa Superior del MacBook Pro 13" Unibody Mid 2009

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

İngilizce
İspanyolca
Adım 5
MacBook Pro 13" Unibody Mid 2009 Upper Case Replacement: adım 0, 2 resimden 1. MacBook Pro 13" Unibody Mid 2009 Upper Case Replacement: adım 0, 2 resimden 2.
  • Remove the two Phillips screws securing the subwoofer to the upper case.

  • The longer ( 8.2 mm ) of the two screws is on the right. The shorter ( 5 mm ) of the two screws is on the left.

  • The subwoofer is still connected to the right speaker, so don't completely remove it just yet.

  • Lift the subwoofer off the optical drive, and set it above the computer.

Retira los dos tornillos Phillips que sujetan el subwoofer a la carcasa superior.

El más largo (8,2 mm) de los dos tornillos está a la derecha. El más corto (5 mm) de los dos tornillos está a la izquierda.

El subwoofer todavía está conectado al altavoz derecho, así que no lo quites por completo todavía.

Levanta el subwoofer de la unidad óptica y colócalo sobre la computadora.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.