Ana içeriğe geç

Sostituzione case superiore MacBook Pro 13" Unibody metà 2009

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

İngilizce
İtalyanca
Adım 5
MacBook Pro 13" Unibody Mid 2009 Upper Case Replacement: adım 0, 2 resimden 1. MacBook Pro 13" Unibody Mid 2009 Upper Case Replacement: adım 0, 2 resimden 2.
  • Remove the two Phillips screws securing the subwoofer to the upper case.

  • The longer ( 8.2 mm ) of the two screws is on the right. The shorter ( 5 mm ) of the two screws is on the left.

  • The subwoofer is still connected to the right speaker, so don't completely remove it just yet.

  • Lift the subwoofer off the optical drive, and set it above the computer.

Svita le due viti a croce Phillips che fissano il subwoofer al case superiore.

La vite più lunga (8,2 mm) è a destra. Quella più corta (5 mm) è a sinistra.

Il subwoofer è ancora collegato allo speaker destro, quindi non rimuoverlo ancora.

Solleva il subwoofer dal lettore CD ed appoggialo sopra il portatile.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.