Ana içeriğe geç

Remplacement de l'ensemble écran de l'iMac 27" 2017

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Fransızca
Adım 3
iMac 27" 2017 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 1. iMac 27" 2017 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 2. iMac 27" 2017 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 3.
Slice through the display adhesive
  • Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center.

  • Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

Servez-vous de votre outil comme d'une roulette à pizza. Progressez le long de l'interstice pour couper la mousse adhésive le long du bord.

Veillez à toujours pousser sur le manche derrière la roue de découpe. Si vous tirez, la roue risque de se décrocher du manche.

Parcourez le bord gauche de l'écran.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.