Ana içeriğe geç

iMac 27インチ 2017 ディスプレイアセンブリの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 18 çevriliyor

Adım 18
iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 1. iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 2. iMac 27" 2017 Display Assembly Replacement: adım 0, 3 resimden 3.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

カードがコーナー付近に挿入された状態で、カードをゆっくりとねじってディスプレイとケースの間の隙間を広げます。

剥がれない部分がある場合は、作業を中断してまだ付着している接着剤を切開するためにもう一枚カードを使用してください。

ディスプレイの上部をフレームから持ち上げます。

ディスプレイを5cm程度持ち上げてください。ーまだデータケーブルと電源ケーブルがiMacに接続された状態です。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.