Adım 10 çevriliyor
Adım 10
Check alignment of the needle
-
For good sound the needle has to fit parallel into the record groove. Othrewise the sound isn't leveled between left and right channel.
-
Therefore templates are available to buy or to print. They got orthogonal lines on the area where the needle is setting in and where it is setting off.
-
The needle should be parallel to the lines on the template at R120,9 mm. If not, the screws shown in step 3 can be loosened and the cartridge can be adjusted. After adjusting tight the screws up again.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.