Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 15 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 2
Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible. If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen. Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.
Separate the bottom edge adhesive
  • Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Due to tight tolerances, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right.

  • If you are having trouble creating a gap, apply more heat to the edge and try again.

  • Do not apply excessive force with the pick, or you risk cracking the back cover glass.

デバイス背面の、下部中央のできる限り端に近い位置に吸盤カップを装着します。

ディスプレイのダメージが大きい場合、透明な梱包テープで全体を覆ってから吸盤カップを装着してください。もしくは代用として強力な梱包テープを吸盤カップのように装着することもできます。それでも上手く行かない場合は、吸盤カップに強力ボンドをつけて固定してください。

吸盤カップを強く一定の力で引き上げて、バックカバーとフレームの間に隙間を作ります。

隙間に開口ピックの先端を差し込みます。

非常に強力に装着されているため、複数回にわたってiOpenerで温めてこじ開ける作業を繰り返す必要があります。

隙間を作れない場合、さらに端に沿って温めてから再試行してください。

ピックに過剰な力を加えないでください。バックカバーガラスを飛散する可能性があります。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.