Ana içeriğe geç

Sustitución de tiras adhesivas iMac Intel 27" 2012-2015

İngilizce
İspanyolca

Adım 11 çevriliyor

Adım 11
iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Install the top and left adhesives: adım 0, 2 resimden 1. iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Install the top and left adhesives: adım 0, 2 resimden 2.
Install the top and left adhesives
  • Work your way counter-clockwise around the perimeter of the iMac, adding three more adhesive strips in the same manner:

  • Strip 12 on the top right

  • Strip 11 on the top left

  • Strip 16 on the left vertical

  • These three strips have a hole at each end—always use the smaller hole for alignment for more precise placement.

  • On the iMac Intel 27" Retina 5K Display, the top-right strip's blue tabs will not line up with the top antenna in the same way as the non-5K model. This is perfectly acceptable and won't impact the performance of the strips or antenna.

Trabaja en el sentido contrario a las agujas del reloj alrededor del perímetro del iMac, agregando tres tiras adhesivas más de la misma manera:

Tira 12 en la parte superior derecha

Tira 11 en la parte superior izquierda

Tira 16 en la vertical izquierda

Estas tres tiras tienen un orificio en cada extremo; usa siempre el orificio más pequeño para alinear y lograr una colocación más precisa.

En el iMac con pantalla Intel Retina 5K de 27", las pestañas azules de la tira superior derecha no se alinearán con la antena superior de la misma manera que en el modelo que no es de 5K. Esto es perfectamente aceptable y no afectará el rendimiento de las tiras o antena.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.