Ana içeriğe geç

Sostituzione strisce adesive iMac Intel 27" 2012-2015

İngilizce
İtalyanca

Adım 16 çevriliyor

Adım 16
iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Test your repair: adım 0, 3 resimden 1. iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Test your repair: adım 0, 3 resimden 2. iMac Intel 27" 2012-2015 Adhesive Strips Replacement, Test your repair: adım 0, 3 resimden 3.
Test your repair
  • At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.

  • If you've already verified that your iMac is working correctly and are ready to seal it up, skip to step 18.

  • Gently insert the display data connector into its socket on the logic board. Be sure to press it straight into the socket, and insert it completely.

  • Flip the display data connector lock down onto the socket.

  • Insert the display power connector into its socket on the logic board.

A questo punto è una buona idea provare la tua riparazione, in modo da verificare che il tuo iMac funzioni correttamente prima di richiuderlo. Segui i prossimi tre passi per collegare momentaneamente i cavi dello schermo e accendere il tuo iMac prima di rimuovere le pellicole protettive dalla strisce adesive.

Se hai già verificato che il tuo iMac funziona correttamente e sei pronto per richiuderlo, salta al passo 18.

Infila delicatamente il connettore dati dello schermo nella sua presa sulla scheda madre. Assicurati di infilarlo nella presa parallelamente alla scheda madre e che sia infilato del tutto.

Chiudi la staffa di bloccaggio in metallo sul connettore del cavo dati per fissarlo nella presa.

Infila il cavo di alimentazione dello schermo nella sua presa sulla scheda madre.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.