Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 1 çevriliyor

Adım 1
The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.
  • The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.

  • Place the iOpener in the microwave and microwave it for one minute on the highest power setting (or just thirty seconds if you're using the newer gel-filled iOpener).

  • Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.

  • Place the iOpener over the home button on the front edge of the display.

ホームボタンアセンブリは、接着剤でフロントパネルに取り付けられています。 iOpenerを使って、接着剤を柔らかくすることを強くお勧めします。

iOpenerを電子レンジに入れて、約1分間温めます。

作業中、iOpenerを過熱しないように注意してください。 iOpenerを再加熱する前に少なくとも2分間あけてください。

ディスプレイ前端にあるホームボタンの上にiOpenerを置きます。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.