Ana içeriğe geç

iMac (27 Zoll, 2019, Retina 5K Display, Intel) Displayeinheit tauschen

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 13 kılavuzları etkileyecektir.

İngilizce
Almanca
Adım 3
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 1. iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 2. iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Slice through the display adhesive: adım 0, 3 resimden 3.
Slice through the display adhesive
  • Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center.

  • Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

Benutze das Werkzeug wie einen Pizzaschneider - rolle es entlang der Fuge zwischen Display und Gehäuse, um den Schaumkleber zu durchschneiden.

Stelle sicher, dass du den Griff immer hinter dem Rad hinterher schiebst. Ansonsten könnte das Rad aus dem Griff herausrutschen.

Fahre mit dem Werkzeug an der linken Displayseite entlang.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.