Eşyalarını Tamir Et Topluluk Mağaza

iMac Intel 27" Retina 5K-scherm 2019 Vervanging van de schermmodule

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 13 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Flemenkçe
Önceki adım Sonraki adım

Adım 10 çevriliyor

Adım 10
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: adım 0, 3 resimden 1. iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: adım 0, 3 resimden 2. iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: adım 0, 3 resimden 3.

  • While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, insert a plastic card between the display and frame.

  • Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

Hoewel je openingstool het leeuwendeel van het werk al heeft gedaan, zal het scherm nog steeds lichtjes aan de behuizing vastgelijmd zitten. Een plastic kaart is tot slot nodig om de laatste stukken lijm los te maken.

Zet je iMac op een tafel met het scherm naar boven.

Steek vervolgens een plastic kaart tussen het scherm en het frame, beginnend in de rechter bovenhoek van de iMac.

Wees voorzichtig en zorg dat je je kaart niet verder dan ongeveer 9.5 mm (3/8") in de computer steekt, aangezien je in dat geval riskeert onderdelen in de computer te beschadigen.

-[* icon_note] While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.
+[* icon_note] While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A [product|IF145-101|plastic card] will be necessary to free up the last of this adhesive.
[* black] Set the iMac face-up on a table.
[* black] Starting from the top right corner of the iMac, insert a plastic card between the display and frame.
[* icon_caution] Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.