Ana içeriğe geç

2019年带Retina 5K 显示屏的27寸iMac 显示屏更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 13 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 18 çevriliyor

Adım 18
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: adım 0, 3 resimden 1. iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: adım 0, 3 resimden 2. iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: adım 0, 3 resimden 3.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

如图所示将卡片插入角落附近,轻轻扭转卡片以增加显示器和外壳之间的间隙。

如果有任何部分似乎粘在一起并且不会分开,请停止扭曲并使用其中一张卡片切割问题区域的粘合剂。

开始从框架上抬起显示器的顶部。

只需将显示器抬高几英寸——它仍然通过数据线和电源线连接到 iMac。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.