Ana içeriğe geç
İngilizce
Japonca
Adım 7
Unscrew the handlebar with the 5mm hex wrench. Remove the rubber cap located underside the handlebar. Remember where you put it. In my case the bell button was the unmarked cable. Start to pull it to get the new one through. Good luck!
red or black?
  • Unscrew the handlebar with the 5mm hex wrench.

  • Remove the rubber cap located underside the handlebar. Remember where you put it.

  • In my case the bell button was the unmarked cable. Start to pull it to get the new one through. Good luck!

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.