Eşyalarını Tamir Et Topluluk Mağaza

Remplacement du bloc d'alimentation tour d'un ordinateur NZXT H510i ATX

Kılavuza Dön
İngilizce
Fransızca
Adım 3
NZXT H510i ATX Mid Tower Power Supply Replacement: adım 0, 1 resimden 1.

  • Drain the capacitors by pressing the power switch.

  • Wait several minutes after doing this to ensure that the capacitors are drained of all residual power.

  • Put on the anti-static wrist strap.

  • Caution: This step is crucial in order to avoid personal injury and damage to the computer from electrical discharge.

Videz les condensateurs en appuyant sur l'interrupteur de marche.

Attendez quelques minutes après cela pour vous assurer que les condensateurs sont vidés de toute charge résiduelle.

Mettez le bracelet antistatique.

Attention : Cette étape est cruciale afin d'éviter des blessures et des dommages à l'ordinateur dus à une décharge électrique.

[* black] Drain the capacitors by pressing the power switch.
[* black] Wait several minutes after doing this to ensure that the capacitors are drained of all residual power.
-[* black] Put on the anti-static wrist strap.
+[* black] Put on the [product|IF145-071|anti-static wrist strap].
[* icon_caution] Caution: This step is crucial in order to avoid personal injury and damage to the computer from electrical discharge.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.