Ana içeriğe geç
İngilizce
Japonca

Adım 1 çevriliyor

Adım 1
Using a tissue paper, wipe off the existing thermal paste. Take your new thermal paste and apply a small amount in the middle of the component. Make sure you have cleaned off the thermal paste on both ends. Make sure you have cleaned off the thermal paste on both ends.
  • Using a tissue paper, wipe off the existing thermal paste. Take your new thermal paste and apply a small amount in the middle of the component.

  • Make sure you have cleaned off the thermal paste on both ends.

ティッシュペーパーを使って、既存の放熱グリスを除去します。新しいペーストを手に取り、コンポーネントの中央部に少量を塗布します。

両側の放熱グリスを綺麗に除去しているか確認してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.