Ana içeriğe geç

Google Pixel 4a 屏幕置换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 11 kılavuzları etkileyecektir.

Adım 1 çevriliyor

İngilizce
Çince
Adım 1
Google Pixel 4a Screen Replacement, Precautionary notes: adım 0, 3 resimden 1. Google Pixel 4a Screen Replacement, Precautionary notes: adım 0, 3 resimden 2. Google Pixel 4a Screen Replacement, Precautionary notes: adım 0, 3 resimden 3.
Precautionary notes
  • You will need to pry the screen up to remove it from the phone. Read the following notes carefully before proceeding.

  • Take note of the two seams on the edge of the phone:

  • Screen seam: This seam separates the screen from the rest of the phone. This is where you should pry.

  • Frame seam: This is where the plastic frame meets the back cover. It is held in place by screws. Do not pry at this seam.

  • Before you begin, note the following areas on the screen:

  • Screen flex cable: Do not insert the opening pick deeper than instructed or you risk damaging this cable.

  • Note the orange ribbon cable under the lower-right corner of the screen, which is susceptible to damage if your opening pick is pressed into it. Only insert your opening pick as little as is necessary to separate the screen adhesive.

  • Adhesive perimeter: Prying beyond this narrow perimeter without angling the pick will damage the OLED panel.

你需要把屏幕撬开并与手机分离。在开始前请仔细阅读以下注意事项。

在屏幕边缘标记出两个缝隙,如图。

屏幕边缝:这个边缝可以让屏幕与手机分离,你需要从这里把屏幕撬开

边框缝:这是后盖与塑料边框交汇之处,由螺丝固定,请不要撬这里

开始之前做好标记。

屏幕排线:开盖器不要插入太深,如果深入到了黄色标记,可能会损坏排线。

屏幕胶的范围:当开盖片超过这个绿色范围时需要调整角度,否则可能损坏 OLED 面板。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.