Eşyalarını Tamir Et Topluluk Mağaza

Google Pixel 4a スクリーンの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 11 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Japonca
Adım 6
Google Pixel 4a Screen Replacement: adım 0, 3 resimden 1. Google Pixel 4a Screen Replacement: adım 0, 3 resimden 2. Google Pixel 4a Screen Replacement: adım 0, 3 resimden 3.

  • The screen adhesive is very weak and you should not need to re-apply heat. If the screen does feel hard to slice, apply heat to the difficult area for one minute and try again.

  • Insert another opening pick into the right edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel.

  • Slide the opening pick around the bottom of the phone to cut the adhesive.

  • There is a delicate cable under the bottom-right corner of the screen. If you feel your opening pick snag on anything, pull it out and try again. Make sure your pick is angled downward and only inserted as little as is necessary to separate the adhesive (no more than 2 mm deep).

  • Leave the pick inserted along the bottom edge to prevent the adhesive from resealing.

スクリーンの接着剤は柔らかくなったら、温める必要はありません。スクリーンが硬く、スライドできない場合は、約1分間温めてください。

2枚目の開口ピックを、デバイス右端に沿ってピックを隙間ができている箇所に差し込みます。OLEDパネルを破損しないようにご注意ください。

開口ピックをデバイス下部周辺にスライドして、接着剤を切開します。

スクリーン右下にはデリケートなケーブルがあります。開口ピックが何かに引っかかったと感じたら、ピックを抜いてもう一度試してみてください。その際、ピックの角度は下向きにして、接着剤を切開するのに必要な深さ(2mm以内)を差し込んでください。

接着剤の再装着を防ぐために、デバイス下部端に開口ピックを残します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.